HP Surestore FC 1Gb/2Gb Switch 8B Getting Started Guide

18 Getting Started Guide
Figure 15. Securing the Switch
9. Provide power to the switch by connecting the power cord to the switch
power supply and to a power outlet. Ensure the power cord is routed so
that it is not exposed to stress. Power is supplied to the switch as soon as
the cord is connected. The switch runs POST (power on self-test) by
default each time it is turned on.
Note Do not connect the switch to the network until the IP address is
correctly set. For instructions on how to set the IP address, see
“Configuring and Connecting the Switch” on page 23.