Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-55
Telnet Commands
1
diagHelp
Display diagnostic command information.
Synopsis diagHelp
Availability all users
Description Use this command to display diagnostic command information.
Operands None.
Example To display information about diagnostic commands:
switch:admin> diagHelp
ramTest System DRAM diagnostic
portRegTest Port register diagnostic
centralMemoryTest Central memory diagnostic
cmiTest CMI bus connection diagnostic
camTest Quickloop CAM diagnostic
statsTest Statistics counter diagnostic
filterTest Frame Filtering Test
portLoopbackTest Port internal loopback diagnostic
sramRetentionTest SRAM Data Retention diagnostic
turboRamTest ASIC builtin Turbo RAM Test
cmemRetentionTest Central Mem Data Retention diagnostic
crossPortTest Cross-connected port diagnostic
spinSilk Cross-connected line-speed exerciser
diagClearError Clear diag error on specified port
diagDisablePost Disable Power-On-Self-Test
diagEnablePost Enable Power-On-Self-Test
setGbicMode Enable tests only on ports with GBICs
setSplbMode Enable 0=Dual, 1=Single port LB mode
supportShow Print version, error, portLog, etc.
diagShow Print diagnostic status information
parityCheck Dram Parity 0=Disabled, 1=Enable
spinFab ISL link diagnostic.
loopPortTest L-Port cable loopback diagnostic
switch:admin>