Fabric OS Reference Manual (Version 3.0)

1-44 Fabric OS Reference
Telnet Commands
1
System Services
The System Services fields are as follows:
Descriptions of the system service setting fields are as follows:
rstatd Dynamically enables or disables a server that returns information about system
operation information through remote procedure calls (RPC). The protocol
provides for a wide-range of system statistics; however, only ethernet interface
statistics (see ifShow) and system up time (see uptime) are supported.
The retrieval of this information is supported by a number of operating systems
which support RPC. Most UNIX-based systems (HP-UX, Irix, Linux, Solaris,
etc.) use the rup and rsysinfo commands to retrieve the information. See your
local system documentation for the appropriate usage of the these or equivalent
commands.
rusersd Dynamically enables or disables a server that returns information about the user
logged into the system through remote procedure calls (RPC). The information
returned includes user login name, the system name, login protocol or type, login
time, idle time, and remote login location (if applicable).
The retrieval of this information is supported by a number of operating systems
which support RPC. On most UNIX-based systems (HP-UX, Irix, Linux, Solaris,
etc.) the command to retrieve the information is rusers. See your local system
documentation for the appropriate usage of this or equivalent command.
rapid
Dynamically enables or disables a service that handles RPC requests for the API
server.
Disable RLS probing
This disables Read Link Error Status probing of the ALPAs.
Table 1-4 Configure Command System Services Parameters
Field Default Range
rstatd Off On/Off
rusersd Off On/Off
rapid On On/Off
Disable RLS probing On On/Off