Fabric OS Reference Manual (Version 3.0)

1-38 Fabric OS Reference
Telnet Commands
1
If you enter the command with no operands, you are prompted for the appropriate values:
Errors Listed below are possible reasons for a failure of this command:
• The host name is not known to the switch
• The host IP address cannot be contacted
• The user does not have permission on the host
• The user runs a script that prints something at login
• The RSHD or FTP server is not running on the host
See Also configDefault
configDownload
configShow
configure
switch:admin> configUpload
Server Name or IP Address [citadel]: 192.168.15.42
User Name [None]: user21
File Name [config.txt]: config-switch.txt
Protocol (RSHD or FTP) [FTP]: ftp
Password: xxxxxx
upload complete
switch:admin>