Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-35
Telnet Commands
1
configShow
Display system configuration settings.
Synopsis configShow ["textfilter"]
Availability All users
Description Use this command to view system configuration settings set by the configure command, as well as
the following settings:
• Ethernet MAC address
• NVRAM boot settings
Operands This command has the following operand:
textfilter Specify a text string in quotation marks that limits the output of the command to
only those entries that contain the text string. The filter does not apply to the
ethernet MAC address and NVRAM data display settings.
Example To display system configuration settings:
switch:admin> configShow
Ethernet address: 0:60:69:0:60:10
Nvram data: fei(0,0)host:/usr/switch/firmware e=192.168.1.62
g=192.168.1.254 u=user tn=switch
Type <CR> to continue, Q<CR> to stop:
diag.postDisable: 0
fabric.domain: 1
fabric.ops.BBCredit: 16
fabric.ops.E_D_TOV: 2000
fabric.ops.R_A_TOV: 10000
fabric.ops.dataFieldSize: 2112
fabric.ops.mode.fcpProbeDisable: 0
fabric.ops.mode.isolate: 0
fabric.ops.mode.tachyonCompat: 0
fabric.ops.mode.unicastOnly: 0
fabric.ops.mode.useCsCtl: 0
fabric.ops.mode.vcEncode: 0
fabric.ops.vc.class.2: 2
fabric.ops.vc.class.3: 3
fabric.ops.vc.config: 0xc0
fabric.ops.vc.linkCtrl: 0
fabric.ops.vc.multicast: 7
fc4.fcIp.address: 192.168.65.62
fc4.fcIp.mask: 255.255.255.0
fcAL.fanFrameDisable: 0
fcAL.useAltBBCredit: 0
lcdContrast: 128
licenseKey: None
rpc.rstatd: 1
rpc.rusersd: 1