Fabric OS Reference Manual (Version 3.0)

1-32 Fabric OS Reference

Telnet Commands

configDefault

Reset a subset of configuration settings to the default values.

Synopsis configDefault

Availability admin

Description Use this command to reset certain configuration settings to the default values.

All configuration parameters, with the following exceptions, are reset to default values:

• Ethernet MAC address, IP address, and subnetmask

• IP gateway address

• License keys

• OEM customization

• SNMP configuration

• System name

• World Wide Name

• Zoning configuration

Note: Refer to the configure command for more information on default values for configuration

parameters.

Note: This command may not be executed on an enabled switch. You must first disable the switch

using the switchDisable command.

Some configuration parameters are cached by the system. To avoid unexpected switch behavior,

reboot the system after executing this command.

Operands None.

Example To restore the system configuration to default values: