Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-29

Telnet Commands

cmemRetentionTest

Test the data retention of the central memory SRAMs.

Synopsis cmemRetentionTest [passCount]

Availability admin

Description Use this command to verify data retention in the central memory SRAMs in the ASIC.

Note: This command may not be executed on an enabled switch. You must first disable the switch

using the switchDisable command.

Operands This command has the following operand:

passCount Specify the number of times to execute this test. The default value is 1. This

operand is optional.

Example To run the data retention test on the central memory SRAMS:

Errors Listed below are possible error messages if failures are detected:

DIAG-LCMRS

DIAG-LCMTO

DIAG-LCMEM