Fabric OS Reference Manual (Version 3.0)

1-22 Fabric OS Reference
Telnet Commands
1
cfgDisable
Disables an effective zone configuration.
Synopsis cfgDisable
Availability admin
Description This command disables the current zone configuration. The fabric returns to non-zoning mode
where all devices see each other. It also commits the zone configuration in the transaction buffer to
volatile and non-volatile memory. This command stops the current zoning transaction.
After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to
commit the transaction, and clear the zone configuration in flash for all the switches.
If a transaction is open on a different switch in the fabric when this command is run, the transaction
on the other switch is automatically aborted. A message is displayed on the other switch notifying
the transaction abort.
Note: This command requires a Zoning License.
Operands None.
Example To disable the current zone configuration:
See Also cfgClear
cfgEnable
cfgSave
switch:admin> cfgDisable