Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 3-5
Licensed Telnet Commands
3
Trunking Commands
The following commands are available with the purchase of a Trunking license key. For more
detailed information about trunking refer to the ISL Trunking User’s Guide.
Performance Monitoring Commands
The following commands are available with the purchase of a Performance Monitoring license key.
For more detailed information about Performance Monitoring refer to the Performance Monitoring
User’s Guide.
Table 3-7 Trunking Commands
Command Description
portCfgTrunkport Configure a port for trunking.
switchCfgTrunk Configure a switch for trunking.
trunkDebug Debug a trunking connection.
trunkShow Display information about trunking on a switch.
Table 3-8 Performance Monitoring Commands
Command Description
perfAddEEMonitor Add an end-to-end monitor to a port.
perfAddIPMonitor Add an IP monitor to a port.
perfAddReadMonitor Add a SCSI Read monitor to a port.
perfAddRWMonitor Add a SCSI Read and Write monitor to a port.
perfAddSCSIMonitor Add a SCSI traffic frame monitor to a port.
perfAddUserMonitor Add a user-defined monitor to a port.
perfAddWriteMonitor Add a SCSI Write monitor to a port.
perfCfgClear Clear the performance monitoring settings from flash memory.
perfCfgRestore Restore performance monitoring settings from flash memory.
perfCfgSave Save the current performance monitoring settings to flash
memory.
perfClrAlpaCrc Clear an ALPA device CRC count by the port and ALPA.
perfDelEEMonitor Delete an end-to-end monitor on port.