Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 3-3
Licensed Telnet Commands
3
QuickLoop Fabric Assist Mode Commands
The following commands are for QuickLoop Fabric Assist Mode. For detailed information about
QuickLoop Fabric Assist refer to the QuickLoop User’s Guide.
Extended Fabric Command
The following commands are available with the purchase of a Extended Fabrics license key. For
detailed information about Extended Fabrics refer to the Distributed Fabrics User’s Guide.
qlPortEnable Enables a QuickLoop port to QuickLoop mode
qlShow Displays QuickLoop information.
qlStatsShow Displays QuickLoop statistics.
qlPortShowAll Displays QuickLoop port information
Table 3-2 QuickLoop Commands (Continued)
Command Description
Table 3-3 QuickLoop Fabric Assist Mode Commands
Command Description
fazoneAdd Add member(s) to an existing QuickLoop Fabric Assist zone.
fazoneCreate Creates a QLFA zone.
fazoneDelete Delete an existing QuickLoop Fabric Assist zone.
fazoneRemove Remove member or members from an existing QuickLoop
Fabric Assist zone.
fazoneShow Display QuickLoop Fabric Assist zone information.
faShow Displays the port number and PID for each Fabric Assist host
port located on this switch. It will also display a listing of each
Target that has a Fabric Assist phantom on the host's port. The
target's PID, assigned phantom ALPA and current online or
offline status will all be displayed.
faStatsShow Displays a set of statistics for each QLFA host on the switch.
Table 3-4 Extended Fabric Commands
Command Description
portCfgLongDistance Configure a port to support long distance links.