Fabric OS Reference Manual (Version 3.0)

3-2 Fabric OS Reference
Licensed Telnet Commands
3
QuickLoop Commands
The following commands are available with the standard QuickLoop license key. For detailed
information about QuickLoop refer to the QuickLoop User’s Guide.
zoneShow Show zone information.
QuickLoop Zoning
qloopAdd Add a member to a QuickLoop.
qloopCreate Create a QuickLoop.
qloopDelete Delete a QuickLoop.
qloopRemove Remove a member from a QuickLoop.
qloopShow Show QuickLoop information.
Zone Configuration
cfgAdd Add a zone to a zone configuration.
cfgCreate Create a zone configuration.
cfgDelete Delete a zone configuration.
cfgRemove Remove a zone from a zone configuration.
cfgShow Show zone configuration definition.
Zone Management
cfgClear Clear all zone configurations.
cfgDisable Disable a zone configuration.
cfgEnable Enable a zone configuration.
cfgSave Save zone configurations in flash memory.
cfgTransAbort Aborts the current zoning transaction.
Table 3-1 Zoning Commands (Continued)
Command Description
Table 3-2 QuickLoop Commands
Command Description
qlDisable Disables QuickLoop mode on the switch.
qlEnable Enables QuickLoop mode on the switch.
qlPartner Specifies a partner for a QuickLoop or displays information
about the existing partner.
qlPortDisable Disables a port from QuickLoop mode.