Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 3-1
Chapter
3
Licensed Telnet Commands
This chapter summarizes the commands that are only available with a license key.
• Zoning Commands on page 3-1
• QuickLoop Commands on page 3-2
• QuickLoop Fabric Assist Mode Commands on page 3-3
• Extended Fabric Command on page 3-3
• Fabric Watch Commands on page 3-4
• FC 6164 Commands on page 3-4
• Trunking Commands on page 3-5
• Performance Monitoring Commands on page 3-5
Note: For more information about Zoning, QuickLoop, Extended Fabrics, Fabric Watch,
Trunking, or Performance Monitoring refer to the specific user guide for that feature.
Zoning Commands
The following commands are available with the standard Zoning license key. For detailed
information about zoning refer to the Zoning User’s Guide.
Table 3-1 Zoning Commands
Command Description
Zone Alias
aliAdd Add a member to a zone alias.
aliCreate Create a zone alias.
aliDelete Delete a zone alias.
aliRemove Remove a member from a zone alias.
aliShow Show zone alias definition.
Zoning
zoneAdd Add a member to a zone.
zoneCreate Create a zone.
zoneDelete Delete a zone.
zoneRemove Remove a member from a zone.