Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 2-17
Error Messages
2
PANIC, INTCONTEXT,
LOG_PANIC
Data out of sync OS error Contact HP technical
support
PANIC, ZOMTIMSET,
LOG_PANIC
Attempt to set a zombie
timer
OS error Contact HP technical
support
PANIC, ZOMTIMKILL,
LOG_PANIC
Zombie timer destroyed OS error Contact HP technical
support
PANIC, FREETIMRLSD,
LOG_PANIC
Free timer released OS error Contact HP technical
support
PANIC, TIMEUSECNT,
LOG_PANIC
Timer use count exceeded OS error Contact HP technical
support
PANIC, LSDB_CKSUM,
LOG_PANIC
Link State Database
checksum failed
OS error Contact HP technical
support
POWER, 1_FAILED,
LOG_CRITICAL
Switch Power Failure Power Supply Failure Contact HP technical
support
POWER, 2_FAILED,
LOG_CRITICAL
Switch Power Failure Power Supply Failure Contact HP technical
support
QL, QUICKLOOP PARTNER
INCOMPATIBLE
The Quick loop partner
switch is running a lower
(than v2.1.3) version of the
software.
OS error Upgrade to a higher
version of the Fabric OS.
RPC, SVC_EXIT An RPC service daemon has
terminated prematurely or
unexpectedly.
OS error Contact HP technical
support
RPC, SVC_REG An RPC service daemon
could not establish service
for a particular protocol
handler.
OS error Contact HP technical
support
SEMA, SEMGIVE, L, M Unable to give a semaphore OS error Contact HP technical
support
SEMA, SEMTAKE, L, M Unable to take a semaphore OS error Contact HP technical
support
SEMA, SEMFLUSH, L, M Unable to flush a semaphore OS error Contact HP technical
support
SYS, NOMEM,
LOG_CRITICAL
No memory OS error Contact HP technical
support
SYS, SYSCALL, LOG_ERROR System call failed OS error Contact HP technical
support
SYS, BADPTR, LOG_ERROR Bad system pointer OS error Contact HP technical
support
Table 2-5 System Error Messages (Continued)
Message Description Probable Cause Action