Fabric OS Reference Manual (Version 3.0)

2-14 Fabric OS Reference
Error Messages
2
System Error Messages
This section provides information on the probable cause of a system error and what actions to take.
Table 2-5 System Error Messages
Message Description Probable Cause Action
ASIC, MINI_BUFFER,
LOG_WARNING
ASIC Failure Bad main board Contact HP technical
support
CONFIG CORRUPT The switch configuration
information has become
irrevocably corrupted.
OS error The system
automatically resorts to
the default configuration
settings.
CONFIG OVERFLOW The switch configuration
information has grown too
large to be saved or has an
invalid size.
OS error Contact HP technical
support
CONFIG VERSION The switch has encountered
an unrecognized version of
the switch configuration.
OS error The system
automatically reverts to
the default configuration
settings.
FABRIC, SEGMENTED,
LOG_WARNING
Fabric segmented. Incompatible fabric
parameters/switches
Conflict zones
Reconfigure fabric or
zones. See configure on
page 1-39.
FABRIC, BADILS,
LOG_WARNING
Bad ISL-ELS size The ISL-ELS payload
is wrong.
Contact HP technical
support
FABRIC, NO_ALIASID,
LOG_WARNING
No free multicast alias Too many multicast
groups in use
Remove some of the
groups
FANS, 1_FAILED,
LOG_WARNING
Switch overheated Fan Failure Contact HP technical
support
FANS, 2_FAILED, LOG_ERROR Switch overheated Fan Failure Contact HP technical
support
FANS, 3_FAILED,
LOG_CRITICAL
Switch overheated Fan Failure Contact HP technical
support
FANS, 4_FAILED,
LOG_CRITICAL
Switch overheated Fan Failure Contact HP technical
support
FANS, 5_FAILED,
LOG_CRITICAL
Switch overheated Fan Failure Contact HP technical
support
FANS, 6_FAILED,
LOG_CRITICAL
Switch overheated Fan Failure Contact HP technical
support
FCIU, IUBAD, L, S Invalid IU OS error Contact HP technical
support
FCIU, IUCOUNT, L, S Total number of IUs Count
< 0
OS error Contact HP technical
support