Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-15

Telnet Commands

camTest

Test the functionality of Content Addressable Memory (CAM).

Synopsis camTest [passCount]

Availability admin

Description Use this command to verify that Content Addressable Memory (CAM) is functionally correct. The

CAM is used by QuickLoop to translate the SID.

Note: This command may not be executed on an enabled switch. You must first disable the switch

using the switchDisable command.

Operands This command has the following operand:

passCount Specify the number of times to execute this test. The default value is 1. This

operand is optional.

Example To verify that Content Addressable Memory (CAM) is functioning correctly:

Errors Below are possible error messages if failures are detected:

DIAG-CAMINIT

DIAG-XMIT

DIAG-CAMSID