Fabric OS Reference Manual (Version 3.0)

1-274 Fabric OS Reference

Telnet Commands

The test flow for each SRAM is as follows:

1. Fill RAM with alternating FFFF 0000 pattern. (Subtest 1: turboram memory fill)

2. For each incrementing address read FFFF 0000 pattern and write 0000 FFFF. (Subtest 2:

turbo-ram r-m-w inc 1)

3. For each incrementing address read 0000 FFFF pattern and write FFFF 0000. (Subtest 3:

turbo-ram r-m-w inc 2)

4. For each decrementing address read FFFF 0000 pattern and write 0000 FFFF. (Subtest 4:

turbo-ram r-m-w dec 1)

5. For each decrementing address read 0000 FFFF pattern and write FFFF 0000. (Subtest 5:

turbo-ram r-m-w dec 2)

6. Repeat steps 1-5 with AAAA 5555 pattern.

Operands This command has the following operand:

passcount Specify the number of turboRamTest passes to execute this test.

Example To execute this test three times: