Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-265
Telnet Commands
1
tempShow
Display temperature readings.
Synopsis tempShow
Availability All users
Description Use this command to display the current temperature readings from each of the five temperature
sensors located on the main printed circuit board of the switch. The sensors are located,
approximately, one in each corner and one at the center of the PCB.
Operands None.
Example To display the temperature readings for a switch:
See Also fanShow
psShow
switch:admin> tempShow
26 26 27 27 26 Centigrade
78 78 80 80 78 Fahrenheit