Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-261
Telnet Commands
1
switchStatusShow
Displays the overall status of the switch.
Synopsis switchStatusShow
Availability All Users
Description Use this command to display the overall status of the switch. The overall status is calculated based
on the most severe status of all contributors:
• Internal Switch Status
• Faulty Ports
• Missing GBICs
• Power Supplies
• Fans
• Temperatures
• Port Status
The overall status can be one of the following:
• Healthy/OK - every contributor is healthy
• Marginal/Warning - one or more components are causing a warning status
• Down/Failed - one or more contributors have failed
If the overall status is not HEALTHY/OK, the contributing factors are listed.
Operands None.
Example There are two examples below. The first shows a switch with a status of MARGINAL, the second
shows the same switch after all the errors have been fixed.
See Also switchStatusPolicyShow
switchStatusPolicySet
switch:admin> switchStatusShow
The overall switch status is Marginal/Warning
Contributing factors:
* 1 missing power supply triggered the Marginal/Warning status
* 2 bad fans, 4 good fans triggered the Marginal/Warning status
* 1 missing GBIC triggered the Marginal/Warning status
switch:admin> switchStatusShow
The overall switch status is HEALTHY/OK