Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-247

Telnet Commands

Operands This command has the following operands:

firstPort Specify the first port of a range of ports to dump information. The default (if no

operand specified) is to print state of port 0. If only firstPort is specified,

only information for firstPort is printed. This operand is optional.

lastPort Specify the last port of range of ports to dump information. If firstPort is

specified but lastPort is not specified, only firstPort information is

printed for the port based commands (portShow, portRegShow,

portRouteShow). If no operand is supplied, firstPort is set to 0 and

lastPort is set to maximum port of switch. This operand is optional.

nLog Specify the number of lines of portLogDump to print:

• 0 = dump all lines (default)

• N = dump the last N lines

• <0 = skip portLogDump

This operand is optional.

Example To display switch information for debugging: