Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-235
Telnet Commands
1
snmpMibCapSet
View and modify options for configuring SNMP MIB/Trap Capability.
Synopsis snmpMibCapSet
Availability admin
Description This command enables a user to turn on or off certain MIBS and TRAPS. This command also
enables a user to turn on or off group information and SSN in SW trap messages. It first displays
current settings and then prompts the user to change the values for each parameter.
• FA-MIB - Specifying yes means the user can access FA MIB variables with an SNMP
manager. The default value is yes.
• SW-TRAP - Specifying yes means the SNMP management application can receive SW traps
from the switch. The default value is yes.
• FA-TRAP - Specifying yes means the SNMP management application can receive FA traps
from the switch. The default value is yes.
• SW-EXTTRAP - Specifying yes means the user can receive group information such as Group
Name, Group Type, and Member Position, and SSN in the SW traps. The default value is no.
Operands None.
Example To view or modify the options for configuring SNMP MIB traps:
See Also agtcfgShow
agtcfgSet
agtcfgDefault
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes]
SW-TRAP (yes, y, no, n): [yes]
FA-TRAP (yes, y, no, n): [yes]
SW-EXTTRAP (yes, y, no, n): [no]
no change