Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-231
Telnet Commands
1
sgroupSupportShow
Displays switch information for all switches within the specified group.
Synopsis sgroupSupportShow "sgroupName"[, "commandName"]
Availability All users
Description This command can display a range of debugging information for all the switches in a switch group.
If no commandName is specified or all is specified in place of a command name, all the supported
commands are displayed for the all the switches within a switch group. If a single command is
specified, only the information for that command is displayed.
Note: This command is for the FC 6164 switch only.
Operands This command has the following operands:
sgroupName Specify the name of the switch group enclosed in quotation marks. This operand
is required.
commandName Specify the name of the command to be displayed for the specified switch group.
If no command is specified, or all is specified, all the supported commands are
executed against all the switches within a switch group. Below is a list of
command names that are supported in the order they are executed. These
command names are not case sensitive. The command must be enclosed in
quotation marks. This operand is optional.
version portRegShow
uptime portRouteShow
tempShow fabricShow
psShow topologyShow
licenseShow qlShow
diagShow nsShow
errDump nsAllShow
switchShow cfgShow
portFlagsShow configShow
portErrShow faultShow
mqShow traceShow
portSemShow portLogDump
portShow