Fabric OS Reference Manual (Version 3.0)

1-228 Fabric OS Reference
Telnet Commands
1
Example To set a group called "My Group" of type "S32_6_1" using Domain IDs 1 through 6:
To create an sgroup using the interactive form of the sgroupSet command:
See Also sgroupDelete
sgroupRename
sgroupShow
sgroupSupportShow
sgroupSwReplace
switch:admin> sgroupSet "S32_6_1", "MyGroup", "1,2,3,4,5,6"
Committing configuration...done.
switch:admin> sgroupSet
Here are the valid sgroup types:
S32_6_1
Please Enter Group Type: [S32_6_1] S32_6_1
Please Enter Group Name: [ ] MyGroup
Enter member list by domain#? (yes, y, no, n): [yes] n
For Group Member #1
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:00:00:20
For Group Member #2
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:20:15:81
For Group Member #3
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:10:02:18
For Group Member #4
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:20:15:71
For Group Member #5
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:00:30:05
For Group Member #6
enter its WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:60:69:00:60:11
Committing configuration...done.