Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-217
Telnet Commands
1
qlStatsShow
Displays QuickLoop statistics.
Synopsis qlStatsShow
Availability All users
Description Use this command to display the following QuickLoop switch statistics:
Last QL init time:
Time of last QuickLoop initialization
QL init attempted:
Number of QuickLoop initialization attempts
QL init succeeded:
Number of times QuickLoop is initialized
Single switch QL:
Number of times as single switch QuickLoop. These numbers are only valid
when two switches are configured to run as peers in QuickLoop.
Dual switch QL:
Number of times as dual switch QuickLoop. These numbers are only valid when
two switches are configured to run as peers in QuickLoop.
QL enabled: Number of times QuickLoop is enabled
QL disabled:
Number of times QuickLoop is disabled
Port caused QL init:
Port that caused last QuickLoop initialization
Operands None.
Example The following entry displays QuickLoop switch statistics:
See Also portStatShow
qlShow
switch:admin> qlStatsShow
Quick loop statistics for switch 1
Last QL init time : Jan 1 00:00:00.000
QL init attempted : 0
QL init succeeded : 0
Single switch QL : 0
Dual switch QL : 0
QL enabled : 0
QL disabled : 0
Port started last init : 0 on switch 0
switch:admin>