Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-215
Telnet Commands
1
qlShow
Displays QuickLoop information.
Synopsis qlShow
Availability All users
Description Use this command to display the following QuickLoop information:
Self: Worldwide name and domain ID of this switch
Peer: Worldwide name and domain ID of partner switch. Peer is displayed only if the
switch has a partner configured
State: The state of the QuickLoop
• Master - Master switch in dual switch QuickLoop
• Non-master - Non-master in dual switch QuickLoop
• Local Lip - Looplet on local switch lipped
• Remote Lip - Looplet on partner switch lipped
• Online - Switch is online
• Offline - Switch is offline
Scope: Dual or single (indicating dual or single switch QuickLoop)
AL_PA bitmap: The AL_PA bitmaps of devices on the QuickLoop
Remote AL_PAs
AL_PAs of devices on partner switch. AL_PAs are listed per port base.
Local AL_PAs
AL_PAs of devices connected to this switch. AL_PAs are listed per port base.
Local looplet state
Indicates state of local looplet
Member: Current QuickLoop member ports
Online: Current online ports in the QuickLoop
Looplet: The state of each looplet. The possible states are:
• Online : Loop initialization completed
• Lipped : NL_Port initiated LIPs
• Lipping : FL_Port initiated LIPs
• Initializing: Looplet initialization in progress
• Bypassed: Looplet being bypassed
• Error : Error found in this looplet
• Offline : Looplet offline
Operands None.