Manualshelf

Fabric OS Reference Manual (Version 3.0)

ManualsBrandsHP ManualsStorageHP StorageWorks FC Entry Switch 8B
221222223224225226227228229230
Fabric OS Reference 1-213
Telnet Commands
1
qlPortEnable
Enables a QuickLoop port.
Synopsis qlPortEnable port
Availability admin
Description Use this command to change the specified port from fabric mode to QuickLoop mode. This
includes any devices connected to this port in the QuickLoop, and causes the switch to re-initialize
the QuickLoop.
If the switch that the port belongs to has a partner, and the partner is running in QuickLoop mode,
both switches re-initialize their QuickLoops to form a new loop that includes the devices connected
to this port.
The specified port must be in fabric mode for this command to have effect.
Operands This command has the following operand:
port Specify the port number to be modified from fabric mode to QuickLoop mode.
Valid values for port number vary depending on the switch type. This operand is
required.
Example The following entry changes port 4 from fabric mode to QuickLoop mode:
See Also qlEnable
qlPortDisable
qlShow
switch:admin> qlPortEnable 4