Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-209

Telnet Commands

qlDisable

Disables QuickLoop mode.

Synopsis qlDisable

Availability admin

Description Use this command to disable QuickLoop mode on a switch. All QuickLoop ports are re-initialized

to fabric mode, allowing public devices to perform fabric login.

If QuickLoop is being run on dual switches, this command disables the local switch and causes the

partner switch to re-initialize to a single-switch QuickLoop, containing only the devices connected

to the partner switch.

Note: If Zoning is in use the qlDisable, qlEnable, and qlPartner commands are not in effect. In

this case, the qlPortDisable command can be used to disable individual ports.

Operands None.

Example The following entry disables QuickLoop mode: