Fabric OS Reference Manual (Version 3.0)

1-200 Fabric OS Reference
Telnet Commands
1
portStatsShow
Display port hardware statistics.
Synopsis portStatsShow port
Availability All users
Description Use this command to display port hardware statistics counters. The first section, below, is common
to all hardware; one of the last two sections (depending on switch type) is shown for loop ports:
stat_wtx 4-byte words transmitted.
stat_wrx 4-byte words received.
stat_ftx Frames transmitted.
stat_frx Frames received.
stat_c2_frx Class 2 frames received.
stat_c3_frx Class 3 frames received.
stat_lc_rx Link control frames received.
stat_mc_rx Multicast frames received.
stat_mc_to Multicast timeouts.
stat_mc_tx Multicast frames transmitted.
tim_rdy_pri Time R_RDY high priority.
tim_txcrd_z Time BB_credit zero.
er_enc_in Encoding errors inside frames.
er_crc Frames with CRC errors.
er_trunc Frames shorter than minimum.
er_toolong Frames longer than maximum.
er_bad_eof Frames with bad end-of-frame.
er_enc_out Encoding error outside frames.
er_disc_c3 Class 3 frames discarded.
fl_open Number of OPNyx sent.
fl_opened Number of OPNyx received.
fl_openfr Number of OPNfr sent.
fl_cls_idle CLS sent due to loop idle.
fl_cls_rx CLS received when OPEN.
fl_bb_stall OPN/CLS BB_Credit stalls.
fl_cf_alloc Number of CFIFOs allocated.
fl_cf_opn CFIFOs delivered when OPENED.