Fabric OS Reference Manual (Version 3.0)

1-198 Fabric OS Reference
Telnet Commands
1
Operands This command has the following operand:
port Specify the port number to be displayed. Valid values for port number vary
depending on the switch type. This operand is required.
Speed The port's fixed speed level or negotiated speed level:
1Gbps - fixed speed of 1Gb per second.
N1Gbps - negotiated speed of 1Gb per second.
2Gbps - fixed speed of 2Gb per second.
N2Gbps - negotiated speed of 2Gb per second.
Negotiating - the speed of the port is being determined.
Interrupts Total number of interrupts.
Unknown Interrupts that are not counted elsewhere.
Lli Low-level interface (physical state, primitive seqs).
Proc_rqrd Frames delivered for embedded N_Port processing.
Timed_out Frames that have timed out.
Rx_flushed Frames requiring translation.
Tx_unavail Frames returned from an unavailable transmitter.
Free_buffer Free buffer available interrupts.
Overrun Buffer overrun interrupts.
Suspended Transmission suspended interrupts.
Parity_err Real Tx data parity error.
2ndary_parity_err Secondary Tx data parity error. These are not real Tx data parity
errors but rather forced by the ASIC due to certain central memory
errors so that the transmitter will abort the frame. This field will
only be displayed when there are errors.
Table 1-18 PortShow display fields (Continued)
Field Description