Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-197
Telnet Commands
1
portShow
Display port status.
Synopsis portShow port
Availability All users.
Description Use this command to display status information for a port. Information varies with the switch
model and port type. The display shows:
Table 1-18 PortShow display fields
Field Description
portFlags Bit map of port status flags.
portType Port type and revision numbers.
portState Port SNMP state:
Online up and running
Offline not online, portPhys gives details
Testing running diagnostics
Faulty failed diagnostics
portPhys Port physical state:
No_Card no interface card present
No_Module no module (GBIC or other) present
No_Light module not receiving light
No_Sync receiving light but out of sync
In_Sync receiving light and in sync
Laser_Flt module is signaling a laser fault
Port_Flt port marked faulty
Diag_Flt port failed diagnostics
Lock_Ref locking to the reference signal
portScn Last state change notification for port.
portRegs Address of the port hardware registers.
portData Address of the port driver private data.
portId 24-bit D_ID for port.
portWwn Port worldwide name.
Distance The port's long distance level.