Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-191
Telnet Commands
1
Operands This command has the following operand:
passCount Specify the number of times (or number of frames per port) to execute this test.
The default value is 0xfffffffe. This operand is optional.
Example To run the portLoopbackTest 100 times:
Errors Below are possible error messages if failures are detected:
DIAG-INIT
DIAG-PORTDIED
DIAG-XMIT
DIAG-TIMEOUT
DIAG-ERRSTAT
DIAG-STATS
DIAG-DATA
See Also ramTest
portRegTest
centralMemoryTest
cmiTest
sramRetentionTest
turboRamTest
camTest
statsTest
filterTest
spinSilk
switch:admin> portLoopbackTest 100
Running Port Loopback Test .... passed.