Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-189

Telnet Commands

Operands This command has the following operands:

count Specify the maximum number of lines to display. Only the most recent count

entries are displayed. This operand is optional.

saved Specify a non-zero value to display the saved port log from the last switch fault.

See uptime for a list of conditions that cause a fault. count is ignored when

displaying the saved log. This operand is optional.

Example The following example shows a section of the port log with an E_Port coming online. The ELP and

EFP exchanges are shown; a name service request was processed.