Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-185

Telnet Commands

event Possible events are:

start switch start or re-start event

disable port is disabled

enable port is enabled

ioctl port I/O control is executed

Tx frame is transmitted (class is indicated)

Rx frame is received (class is indicated)

scn state change notification is posted

pstate port changes physical state

rejec received frame is rejected

busy received frame is busied

ctin CT based request is received

ctout CT based response is transmitted

errlog message is added to the error log

loopscn loop state change notification is posted

create task is created

port Port number of the affected port.

cmd Command value description depends on event type:

ioctl I/O control command code

Tx & Rx frame payload size

scn new state.

pstate new physical state. Refer to Table 1-14 for a list of pstate code values.

ctin CT-subtype: fc = Simple Name Server, f8 = Alias Server.

ctout same as ctin above.

errlog error level (see errShow)

loopscn Current loop state during loop initialization. Possible values are:

• OLP - offline (disconnected or nonparticipating)

• LIP - FL_Port entered INITIALIZING or OPEN_INIT state

• LIM - LISM completed, FL_Port became the loop master

• BMP - loop initialization completed, FL_Port in MONITORING state

• OLD - port transited to the OLD_PORT state

• TMO - loop initialization times out

Table 1-13 portLogShow Command Field Descriptions (Continued)

Field Possible Values