Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-183
Telnet Commands
1
portLogDump
Display the port log without page breaks.
Synopsis portLogDump [count[, saved]]
Availability All users
Description Use this command to display the port log, listing all entries in the log without page breaks. This
command displays the same information as portLogShow, but portLogShow prompts the user
to enter ‘returns” between each page.
See portLogShow for a description of the port log.
If the port log is disabled, the following message appears as the first line (see portLogClear for
details):
WARNING: port log is disabled
Operands This command has the following operands:
count Specify the maximum number of lines to be displayed. Only the most recent
count entries are displayed. This operand is optional.
saved Specify a nonzero value to display the saved port log from the last switch fault.
See uptime for conditions that cause a fault. count is ignored when displaying
the saved log. This operand is optional.
Example To display the port log:
See Also portLogClear
portLogShow
uptime
switch:admin> portlogdump 10
May 1 task event port cmd args
----------------------------------------------
16:51:15.499 tShell ioctl 7 de 10f9bb90,0
16:51:15.499 tShell ioctl 8 de 10f9bb90,0
16:51:15.499 tShell ioctl 9 de 10f9bb90,0
16:51:15.499 tShell ioctl 10 de 10f9bb90,0
16:51:15.499 tShell ioctl 11 de 10f9bb90,0
16:51:15.499 tShell ioctl 12 de 10f9bb90,0
16:51:15.499 tShell ioctl 13 de 10f9bb90,0
16:51:15.499 tShell ioctl 14 de 10f9bb90,0
16:51:15.499 tShell ioctl 15 de 10f9bb90,0
16:58:28.383 tShell create tSyslog
switch:admin>