Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-177
Telnet Commands
1
portCfgTrunkport
Configure a port to be enabled or disabled for trunking.
Synopsis portCfgTrunkport port, 1|0
Availability admin
Description Use this command to configure a port to be enabled or disabled for trunking.
Note: This command requires a Trunking license.
Operands This command has the following operand:
port Specify the port number where you want to enable or disable trunking. This
operand is required.
1|0 Specify 1 to enable this port for trunking. Specify 0 to disable this port for
trunking. This operand is required.
Example To enable port 5 for trunking:
See Also switchCfgTrunk
portShow
portCfgShow
switchShow
switch:admin> portCfgTrunkport 5, 1
Committing configuration...done.