Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-163
Telnet Commands
1
perfShowFilterMonitor
Display filter-based monitor information and frame traffic for a port.
Synopsis perfShowFilterMonitor port[, interval]
Availability admin
Description Use this command to display all the filter-based monitors defined on the specified port and the
traffic count values. This command can display (if no interval operand is specified):
• Key - the monitor number
• Alias - the monitor alias name
• Owner_app - TELNET or WEB_TOOLS
• Owner_ip_addr - the IP address of the owner of the filter monitor
• Frame_count - cumulative 64 bit frame count
If you do not specify a value for the interval operand this command displays a cumulative count of
the traffic detected by the monitor. If you specify a value for the interval operand this command
displays a snapshot of the traffic at the specified interval.
Operands This command has the following operand:
port Specify the port number where you want to display the filter monitors. This
operand is required.
interval Specify an interval in seconds. This operand is optional.