Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-161
Telnet Commands
1
perfShowEEMonitor
Display end-to-end monitor information and frame traffic on a port.
Synopsis perfShowEEMonitor port[, interval]
Availability admin
Description Use this command to display end-to-end monitor information and frame traffic on a port. This
command can display (if no interval operand is specified):
• Key - the monitor number
• SID - Sending ID
• DID - Destination ID
• Owner_app - TELNET or WEB_TOOLS
• Owner_ip_addr - the IP address of the owner of the filter monitor
• Tx_count - Transmitting frame count
• Rx_count - Receiving frame count
• Crc_count - CRC error count
If you do not specify a value for the interval operand this command displays end to end monitor
information and a cumulative count of the traffic detected by the monitor. If you specify a value for
the interval operand this command displays a snapshot of the traffic at the specified interval.
Operands This command has the following operands:
port Specify the port number where you want to display the end-to-end traffic. This
operand is required.
interval Specify an interval in seconds. This operand is optional.