Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-1
Chapter
1
Telnet Commands
agtcfgDefault
Reset the SNMP agent configuration to default values.
Synopsis agtcfgDefault
Availability admin
Description Use this command to reset the configuration of the SNMP agent to default values:
• sysDescr - The default value is Fibre Channel Switch.
• sysLocation - The default value is End User Premise.
• sysContact - The default value is Field Support.
• swEventTrapLevel - The default value is 0 (off).
• authTraps - The default value is 0 (off).
• The IP addresses of the trap recipient for each community defaults to 0.0.0.0 or no trap
recipient. The 6 communities are:
Community 1: Secret C0de
Community 2: OrigEquipMfr
Community 3: private
Community 4: public
Community 5: common
Community 6: FibreChannel
Note: For more information about SNMP configuration parameters refer to the agtcfgSet
command.
Operands None.