Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-135
Telnet Commands
1
nbrStateShow
Display FSPF neighbor's state.
Synopsis nbrStateShow [port]
Availability All users
Description Use this command to display information about neighbors to the local switch, or information about
a specific neighbor if a port number is supplied. A neighbor is a switch that is directly attached to
the local switch.
The display shows the following fields:
Local Domain IDDomain number of local switch.
Local Port E_Port (interface) on local switch.
Domain Domain number of remote switch.
Remote Port E_Port (interface) on remote switch.
State State of the neighbor. The E_Port is used to route frames only if the neighbor is
in NB_ST_FULL state.
Operands This command has the following operand:
port Specify the port on the local switch that connects to the neighbor being
displayed. Valid values for port number vary depending on the switch type. This
operand is optional.
Examples To display information about switches directly connected to the local switch:
See Also interfaceShow
switch:admin> nbrStateShow
Local Domain ID: 15
Local Port Domain Remote Port State
-------------------------------------------------------
2 13 13 NB_ST_FULL
6 13 9 NB_ST_FULL
7 13 8 NB_ST_FULL
13 3 7 NB_ST_FULL