Fabric OS Reference Manual (Version 3.0)

1-134 Fabric OS Reference
Telnet Commands
1
nbrStatsClear
Reset FSPF interface counters.
Synopsis nbrStatsClear [port]
Availability All users
Description Use this command to reset the counters of FSPF frames transmitted and received on an interface.
Use this command with no operand to reset counters on all interfaces.
Operands This command has the following operand:
port Specify the port number for the counters to be reset. Valid values for port number
vary depending on the switch type. This operand is optional.
Examples To display how to reset the counters on port 4:
See Also interfaceShow
portShow
switchShow
switch:admin> interfaceShow 4
idbP = 0x10f61f40
Interface 4 data structure:
nghbP = 0x10f61d90
ifNo = 4
defaultCost = 1000
cost = 1000
delay = 1
lastScn = 5
lastScnTime = Mar 29 12:57:52.833
upCount = 2
lastUpTime = Mar 29 12:57:52.833
downCount = 1
lastDownTime = Mar 29 12:57:47.566
downReason = 2
iState = UP
Type <CR> to continue, Q<CR> to stop:
Neighbor 4 data structure:
state = NB_ST_FULL
lastTransition = Mar 29 12:57:52.865
nghbCap = 0x0
nghbId = 2
idbNo = 4
remPort = 1
nflags = 0x3
< ... sample output truncated ... >