Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-125
Telnet Commands
1
msConfigure
Configure the Management Server.
Synopsis msConfigure
Availability admin
Description Use this command to display and configure parameters used to access the Management Server. The
Management Server allows a storage area network (SAN) management application to retrieve and
administer fabric and interconnect elements such as switches. It is located at the Fibre Channel
address, FFFFFAh.
If the Access Control List (ACL) is empty (this is the default value), the Management Server is
accessible to all systems connected in-band to the fabric. To restrict access, specify the World Wide
Name (WWN) for one or more management applications; access is then restricted to those WWNs.
The ACL is implemented on a per switch basis and should be configured on the switch to which the
management application station is directly connected.
This command is interactive and provides the following choices:
0 Done (with the administration)
1 Display the access control list (ACL)
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
If a change is made, you are prompted to save the changed ACL to flash memory. The saved ACL
is restored on future reboot.
Operands None.