Manualshelf

Fabric OS Reference Manual (Version 3.0)

ManualsBrandsHP ManualsStorageHP StorageWorks FC Entry Switch 8B
121122123124125126127128129130
Fabric OS Reference 1-109
Telnet Commands
1
ipAddrShow
Display ethernet and FC IP addresses.
Synopsis ipAddrShow
Availability All users
Description Use this command to display ethernet and Fibre Channel IP addresses. The following are shown:
Ethernet IP Address IP address of the ethernet port.
Ethernet Subnetmask IP subnet mask of the ethernet port.
Fibre Channel IP Address IP address of the Fibre Channel ports.
Fibre Channel Subnetmask IP subnet mask of the Fibre Channel ports.
Gateway Address IP address of the gateway.
IP addresses are displayed in conventional dot (‘.’) notation.
All Fibre Channel ports on a switch have the same IP address and subnet mask. The Fibre Channel
IP address displays none if the switch is not configured to run IP over Fibre Channel.
Operands None.
Example To display the switch IP addresses:
See Also ifShow
ipAddrSet
switch:admin> ipAddrShow
Ethernet IP Address: 192.168.1.65
Ethernet Subnetmask: none
Fibre Channel IP Address: 192.168.65.65
Fibre Channel Subnetmask: none
Gateway Address: 192.168.1.1