Fabric OS Reference Manual (Version 3.0)

1-102 Fabric OS Reference
Telnet Commands
1
Operands This command has the following operand:
port Specify the port number to display the interface data structures for. Valid values
for port number vary depending on the switch type. This operand is required.
Examples To display FSPF interface information:
See Also portShow
switchShow
switch:admin> interfaceShow 4
idbP = 0x10f61f40
Interface 4 data structure:
nghbP = 0x10f61d90
ifNo = 4
cost = 1000
delay = 1
lastScn = 5
lastScnTime = Mar 29 12:57:52.833
upCount = 2
lastUpTime = Mar 29 12:57:52.833
downCount = 1
lastDownTime = Mar 29 12:57:47.566
downReason = 2
iState = UP
Type <CR> to continue, Q<CR> to stop:
< ... sample output truncated ... >