Fabric OS Reference Manual (Version 3.0)

Fabric OS Reference 1-101
Telnet Commands
1
idbNo IDB number. Should be equal to portnumber
remPort Port number on the remote switch connected to this port.
nflags Internal FSPF flags.
initCount Number of times this neighbor was initialized, without the interface going down.
&dbRetransList
Pointer to the database retransmission list.
&lsrRetransList
Pointer to the Link State Records (LSR) retransmission list.
&lsrAckList
Pointer to the Link State Acknowledgements (LSA) retransmission list.
inactTID Inactivity timer ID.
helloTID Hello timer ID.
dbRtxTID Database retransmission timer ID.
lsrRtxTID LSR retransmission timer ID.
inactTo Inactivity time out value, in milliseconds. When this time out expires, the
adjacency with the neighbor switch is broken and new paths are computed to all
possible destination switches in the fabric.
helloTo Hello time out value, in milliseconds. When this time out expires, a Hello frame
is sent to the neighbor switch through this port.
rXmitTo Retransmission time out value, in milliseconds. It is used to transmit topology
information to the neighbor switch. If no acknowledgement is received within
rXmitTo, frame is retransmitted.
nCmdAcc Total number of commands accepted from the neighbor switch. Number includes
Hellos, Link State Updates (LSU) and Link State Acknowledgements.
nInvCmd Number of invalid commands received from the neighbor switch. Usually
commands with an FSPF version number higher than the one running on the
local switch.
nHloIn Number of Hello frames received from the neighbor switch.
nInvHlo Number of invalid Hello frames (Hello frames with invalid parameters) received
from the neighbor switch.
nLsuIn Number of LSUs received from the neighbor switch.
nLsaIn Number of LSAs received from the neighbor switch.
attHloOut Number of attempted transmissions of Hello frames to the neighbor switch.
nHloOut Number of Hello frames transmitted to the neighbor switch.
attLsuOut Number of attempted transmissions of LSUs to the neighbor switch.
nLsuOut Number of LSUs transmitted to the neighbor switch.
attLsaOut Number of attempted transmissions of LSAs to the neighbor switch.
nLsaOut Number of LSAs transmitted to the neighbor switch.