Fabric OS Procedures Guide (Version 3.0)

4-2 Fabric OS Procedures Guide
Displaying Error Logs and Status
4
where portnumber is the number of the port you want to view. A table of hardware statistics
for the port is displayed.
Note: For more information on the portStatsShow command, refer to the Fabric OS Reference
Manual.
Displaying a Summary of Port Errors
This command displays a summary of port errors for all the ports in a single switch.
To display a summary of port errors for a switch:
1. Login to the switch as the admin user.
2. At the command line enter the following command:
portErrshow
The display contains one output line per port. The following table explains the types of errors
counted:
Note: For more information on the portErrShow command refer to the Fabric OS Reference
Manual.
Table 4-1 Error Summary Description
Error Type Description
frames tx Frames transmitted.
frames rx Frames received.
enc in Encoding errors inside frames.
crc err Frames with CRC errors.
too shrt Frames shorter than minimum.
too long Frames longer than maximum.
bad eof Frames with bad end-of-frame delimiters.
enc out Encoding error outside of frames.
disc c3 Class 3 frames discarded.
link fail Link failures (LF1 or LF2 states).
loss sync Loss of synchronization.
loss sig Loss of signal.
frjt Frames rejected with F_RJT.
fbsy Frames busied with F_BSY.