HP StorageWorks XP Fast Recovery Solution administration guide; Windows Server 2003; XP128, XP1024, XP10000, XP12000 (B9552-96017, March 2006)

Configuration 31
Configuring the SVP server and software
The HP service representative configures the SVP as part of disk array
installation, which may include the following SNMP agent configuration
steps.
This procedure gives the specified Command View XP management station
exclusive control of the array. If you need access to the array from multiple
CV XP stations, skip this procedure.
1. (HP representative only) On the SVP, open a command line window.
2. (HP representative only) At the command prompt, type snmpagt.exe
to display a dialog window with a property sheet.
3. (HP representative only) From the manager page, enter the IP address
of the Command View XP management workstation.
4. (HP representative only) Reboot the SVP.