HP StorageWorks XP Fast Recovery Solution administration guide: Windows Server 2003 (B9552-96004, September 2005)

36 HP StorageWorks XP Fast Recovery Solution for Windows Server 2003: Administration Guide
Configuring the disk array
Configure the disk array as follows. Many of these steps repeat what you
may have already done when installing HP HWP; however, additional steps
are included near the end of the procedure; read carefully.
Illustrations and instructions are for Command View XP 2.0. Significant
differences for Command View XP 1.8 are given in parentheses.
1. Log into Command View as an administrator (the default administrator
user name and password is administrator).
2. Click Array Manager in the left panel and click the Device Launcher
tab (v1.8 click the Main tab and Overview tab).
3. Click the array name in the Device Name column to select the array you
want to access.
The array management window appears.