HP 4400 Enterprise Virtual Array Installation Guide (5697-1146, September 2011)

NOTE: The embedded switch has an MDI-X port that supports straight-through or crossover
Ethernet cables. Use a Cat 5e or greater cable.
If needed, you can connect directly to the switch using the console port (2, Figure 16 (page
23)) and the provided console cable (manufacturing part number 259992–001). You may
need a USB adapter for this cable if your laptop does not have a serial port.
2. Connect the Ethernet port (2, Figure 16 (page 23)) of the embedded switch to the laptop.
Figure 16 HSV300-S rear view
1. Console port
2. Ethernet port
3. Browse to http://10.77.77.77 for the Controller 1 switch.
NOTE: Fibre Channel switches are referred to as left slot switch and right slot switch in
Brocade Web Tools.
The switch management GUI (Brocade Web Tools) appears (Figure 17 (page 24)).
Configuring the embedded switch in an HSV300-S controller 23