HP StorageWorks ESL E-Series Tape Library Internal Network Kit Installation and Replacement Instructions (AH997-96001, September 2007)

3Unplugtheswitch’spowercordfrom
the top of the PDU
11607
4 Label the c
ables plugged into the
switch
Label the cables or write a note that shows the locations of all the
cables plugged into the switch to make it easier to reconnect them later.
5 Unplug all cables from the switch
11610
6Removetheswitchfromthecabinet
11587
Remove the screws that attach the sw itch to the cabinet with a #2
Phillips screwdriver and remove the switch from the cabinet. Keep the
screws to use for attaching the new switch.
7Unplugt
he power cord from the back
of the swi
tch
11648
Keep the power cord to use on th e new switch.
Page 2