HP StorageWorks ESL E-series Cluster Controller Installation Poster (December 2005)

Removal
Replacement
Take note of the cable connections for easier
reconnection to the replacement controller, then
remove the cables from the controller.
Push the white tabs in to free the ejector handle;
pull on the ejector handles to remove the cluster
controller.
6
78
910
Use a #2 Phillips screwdriver to loosen the
captive screws in the black ejector handles at
both ends of the cluster controller.
Reconnect the cables to the new cluster controller.
Align the replacement cluster controller with the
guides in the library cluster controller bay, and
slide the controller into the library. It will snap
into place. Tighten the captive screws.
5
Identify
the cluster
controller to
be replaced.