HP StorageWorks ESL E-Series Tape Library users guide (350799-010, October 2007)

1Foam

Figure 63 Adding the shipp ing foam to th e library perimeter

Disconnecting library cables

To disconnect library cables:

1. Disconnect the FC cables connecting from the library to the host.

2. If you have LTO4 tape drives, disconnect the FC cables from the tape drives to the SAN.

3. Disconnect the Ethernet cable connecting to the local network.

4. Disconnect the power c ord from the library to its power source.

5. Pack the removed cables in with other library accessories.

6. Disconnect the following cables but leave them routed in the channel:

• Drive cluster and card cage power cables

• Drive cluster Ethernet cables

• Drive cluster I2C cables

• Drive SCSI cables (not present on Ultrium tape drives)

• Drive FC cables (not present on SCSI drives)

• Cabinet controller SCSI cable

HP StorageWorks